Home > News > Content
Ink Cartridges Are An Important Part Of Inkjet Printers
Aug 08, 2017

Cartridges can be classified according to color or structure: according to the color can be divided into monochrome, three-color, colored, etc .; according to the structure can be divided into one and split. In order to achieve better printing results while simplifying the maintenance process, one cartridge will be integrated in the ink cartridge, ink cartridges and nozzles at the same time installed on the trailer, G2 Cartridge the printer becomes the most critical components. This one-piece cartridge structure is simple, the volume can be done very small, and the cost is low, to change ink for the nozzle, the higher cost of supplies. The other is split, the cartridge and the nozzle separately, ink only after the use of ink cartridges, so the cost of supplies is low. However, G2 Cartridge since the ink cartridge and the ink jet head are separated from each other and can not be sealed after installation, the ink jet may be caused by dust and installation contact

The internal structure of the ink cartridges is not complicated, mainly by the ink sponge and pressure jet auxiliary device. Whether it is a one-piece cartridge or a split cartridge, G2 Cartridge the jetting aid requires a filter, a sealing film and a sealing ring, which helps the ink to reduce the particle size during splashing while ensuring accurate pressure balance.

The choice of the jetting aid is also related to the working mode of the ink cartridge. At present, it is mainly divided into bubble type and microneedle type piezoelectric type. From the printing effect point of view, the bubble technology has been improved to achieve a very good effect, not lost in the micro-needle point piezoelectric inkjet technology.

In addition to inkjet inkjet technology, G2 Cartridge the type of ink will also have no small impact on the print quality. If the color classification, ink can be divided into dye-based ink and pigment type ink. Dye-based inks are dyes-based inks and are currently used in most inkjet printers. Pigment-based ink is a pigment-based ink, a better color fullness, more suitable for photo printing. G2 Cartridge If the difference between the ink solvent can be divided into water-based ink and oil-based ink. The water-based ink is mainly composed of water and a water-soluble solvent as a dissolving color base, and the oil-based ink is a non-water-soluble solvent as a main component of the dissolved color base.

Ink cartridges for the entire inkjet printer has a very important position, especially some low-end printers, has reached 2 boxes = 1 printer price. Therefore, in the purchase of the printer, you must consider the situation of the cartridge. Cleaning the ink cartridges is an important part of the inkjet printer, G2 Cartridge its quality will directly affect the printing of inkjet printers, while the cartridge is also more prone to failure of the components. Print head cleaning method Inkjet printer in a long time without or after a period of time, there will be printing is not clear, breakpoints, broken lines and other failures, then need to use the print head cleaning method to solve. Most inkjet printers will automatically clean the print head and have a button to clean the printhead. Such as Canon, most of the inkjet printer is equipped with quick cleaning, routine cleaning and thorough cleaning third gear cleaning function, G2 Cartridge the specific cleaning operation, please refer to the inkjet printer operating manual steps on it. However, if the continuous cleaning after a few times to print is still not satisfied, it should be ink has been used up, need to replace the cartridge. When the ink cartridge is not used, it is best not to remove it, otherwise it will cause the ink to waste or the printer to measure the ink. In general, the printer's ink on the printer within a short time will not happen hardening like deterioration, so we do not need to take out the cartridge. However, if your printer really do not have long-term, then it needs to take out the cartridge, so you can prevent ink deterioration, but also to ensure the life of the nozzle.